General
Frequency range    
- E:TX&RX    144-145.995MHz ,  430-439.995MHz
- T:    TX: 144-147.995MHz / 420-449.995MHz, RX: 136-173.995MHz / 400-511.995MHz

Operating mode     F2(1200bps)/8K50F3E/16k0F3E/F1E(Op: digital)
Channel steps     5, 10, 12.5, 15, 20, 25, 30KHz
Memory channel     100 channels + 2 quick recall (CALL)
Antenna Connector     BNC (50ohm unbalanced)
Frequency stability     +/- 2.5ppm TCXO
Power supply requirement     6.0 - 15.0V DC negative ground

Current drain    
Approx. 1.2A TX VHF at 13.8V DC
Approx. 1.4A TX UHF at 13.8V DC
Approx. 75mA squelched
Approx. 25mA battery save ON

Usable temperature range     -10 - +60c (14 - 140F)
Dimensions (w/o projection
EBP-50N battery included)     56mm(W) x 124mm(H) x 36.5mm(D)
2.2''(W) x 4.88"(H) x 1.44"(D)
Weight     Approx. 310g (11oz) with EBP-50N and EA98 whip antenna
CTCSS tone     encoder/decoder 39 tones
Digital Coded Squelch     encoder/decoder 104 codes

Transmitter
Output power    
Approx. 5W at 13.8V DC V/UHF
Approx. 4.5W VHF with 9.6V packs
Approx. 4.0W UHF with 9.6V packs
Approx. 2.5W V/UHF with EBP-56N
Approx. 0.8W Low position V/UHF

Modulation system     Variable reactance frequency modulation
Spurious emission     Less than -60 dB
Maximum frequency deviation     +/- 5 KHz

Receiver
Receive system     Double-conversion superheterodyne
Sensitivity (-12dB SINAD)     Less than -15.0dBu

Selectivity    
-6dB: 12KHz or more
-60dB: 30KHz or less

Audio output power     More than 200mW(8ohm 10%THD)
[show less]